Copyright Notice

© Copyright 2026 Brenda Swenson retains copyrights to all images (artwork and reference photographs). All images on this site are property of Brenda Swenson and may not be used in any way for commercial, financial or personal use without written consent. Brenda Swenson retains all rights to republication (printed and digital) and anything but personal viewing of artworks. www.SWENSONsART.net
Showing posts with label Opaque & Transparent Paint. Show all posts
Showing posts with label Opaque & Transparent Paint. Show all posts

Wednesday, November 29, 2017

Negative Painting - Poinsettias



Reference Photo 
Cameras are a wonderful tool but it's important to remember photographs are simply a springboard. I don’t rely too heavily on them. The sooner I respond to what’s happening on the paper and quit looking at the photo the better off I’ll be…especially with the technique of negative painting.

1: DRAWING 
I start by drawing the poinsettias with a 2B pencil on Arches 140lb cold press paper. I'm especially aware of the space and shapes between the flowers and leaves (negative space). I want shape and size variety. I draw enough to get the general shapes, but not too much. I intentionally leave areas understated so I'll have opportunities for negative shapes to develop in the painting process. 



MOTHER COLORS
I use transparent paint to build up glazes. I limit my underpainting to 3 

colors. To determine which 3 colors I will use I make numerous color swatches. The paints need to be the same consistency (whole milk) to encourage ample mixing on the paper. I'm looking for interesting combinations (how they mix when wet, range of colors, range of values and do they relate to my subject). The 3 paint colors I selected I call my Mother Colors: New Gamboge (NG), Quinacridone Rose (QR), and Phthalo Blue GS (PB GS).


2: UNDERPAINTING
I wet the watercolor paper with clean water and introduce the 3 paint colors separately into the wet surface. I paint at an angle to encourage mixing as the paint moves. I don’t overwork the surface with a paint brush but encourage the paint to mix and mingle on the paper. I leave a third of the paper untouched with paint. As it dries the paint will continue to move and hopefully a small amount of light/whites will remain. Let throughly dry naturally (without a hair dryer).

3: START GLAZING
I continue with my Mother Colors (original 3 colors) and I pull French 

Ultramarine into the mixing area of my palette. When I bring a new color into the mix it touches one of the original Mother Colors. Why? Having a new color touch one of the original 3 colors creates harmony in the glazing process. When I begin glazing I'll paint over some of the poinsettia petals, leaves and background at the same time. I start in the upper left hand corner and work clockwise. I paint hard edges against the petals I want to save and soften as I pull away. As I work clockwise around the main poinsettia I vary my colors slightly with the Mother Colors and French Ultramarine. Let throughly dry.


4: GLAZING CONTINUED - GREENS
Periodically I wipe off my palette especially if the mixing area has become a neutralized mixture. Mud, neutrals or grays are wonderful and every painter should know how to mix them. But know when you want them and how these grays work to make other colors more lively.

I pull out fresh paint into the center of my palette. I have the Mother Colors (NG, QR, PB), French Ultramarine and the new addition of Hansa Yellow Light. Starting on the left side directly below the poinsettia and working counter clockwise. I use a mixture of French Ultramarine & 

Quinacridone Rose. I carve out shapes with hard edges against the petals. As I move across the lower section I want my colors to move from purples into the greens. With each brush load I slightly shift the green. Below the center poinsettia is a cooler green and pushes towards the blues. As I move across the lower section (left to right) I carve out more petal shapes. Above the far right poinsettia the greens are much warmer and have more Hansa Yellow Light. The small negative shapes in the center of each flower is a dark mixture of French Ultramarine & Quinacridone Rose. Let throughly dry.


FINAL STAGE: DARKEST DARKS, SMALLEST SHAPES & DETAILS
As the poinsettia turns from the light I have a variety of shadows. Form shadows have soft edges and cast shadows have hard edges. The shadows on the petals are a darker value of Quinacridone Rose with a touch of French Ultramarine as it turns from the light. When I need to soften the edge of a form shadow I use clean water on the edge before the paint has a chance to dry. The leaves beneath the center poinsettia is the darkest passage of negative painting. I use a mixture of Phthalo Blue GS & New Gamboge, before the paint has a chance to loose its shine I drop a little Quinacridone Rose into the passage. The unexpected warmth brings life to the dark greens. A few touches of color in the center of the poinsettia and it’s finished.



CONCLUSION
Hope you’ve enjoyed this short demonstration. I used the Daniel Smith Essentials Set. The set consists of six tubes of paints. A warm and cool: red, blue and yellow. The colors are VERY transparent (exception of Hansa Yellow Light which is semi-transparent). 

Happy Painting!
Brenda

Sunday, December 13, 2015

Poinsettia: Negative Painting Demonstration



Reference Photo 
Cameras are a wonderful tool but it's important to remember photographs are simply a springboard. I don’t rely too heavily on them. The sooner I respond to what’s happening on the paper and quit looking at the photo the better off I’ll be…especially with the technique of negative painting.

1: DRAWING 
I start by drawing the poinsettias with a 2B pencil on Arches 140lb cold press paper. I'm especially aware of the space and shapes between the flowers and leaves (negative space). I want shape and size variety. I draw enough to get the general shapes, but not too much. I intentionally leave areas understated so I'll have opportunities for negative shapes to develop in the painting process. 


MOTHER COLORS
I use transparent paint to build up glazes. I limit my underpainting to 3

colors. To determine which 3 colors I will use I make numerous color swatches. The paints need to be the same consistency (whole milk) to encourage ample mixing on the paper. I'm looking for interesting combinations (how they mix when wet, range of colors, range of values and do they relate to my subject). The 3 paint colors I selected I call my Mother Colors: New Gamboge (NG), Quinacridone Rose (QR), and Phthalo Blue GS (PB GS).

2: UNDERPAINTING
I wet the watercolor paper with clean water and introduce the 3 paint colors separately into the wet surface. I paint at an angle to encourage mixing as the paint moves. I don’t overwork the surface with a paint brush but encourage the paint to mix and mingle on the paper. I leave a third of the paper untouched with paint. As it dries the paint will continue to move and hopefully a small amount of light/whites will remain. Let throughly dry naturally (without a hair dryer).

3: START GLAZING
I continue with my Mother Colors (original 3 colors) and I pull French

Ultramarine into the mixing area of my palette. When I bring a new color into the mix it touches one of the original Mother Colors. Why? Having a new color touch one of the original 3 colors creates harmony in the glazing process. When I begin glazing I'll paint over some of the poinsettia petals, leaves and background at the same time. I start in the upper left hand corner and work clockwise. I paint hard edges against the petals I want to save and soften as I pull away. As I work clockwise around the main poinsettia I vary my colors slightly with the Mother Colors and French Ultramarine. Let throughly dry.


4: GLAZING CONTINUED - GREENS
Periodically I wipe off my palette especially if the mixing area has become a neutralized mixture. Mud, neutrals or grays are wonderful and every painter should know how to mix them. But know when you want them and how these grays work to make other colors more lively.

I pull out fresh paint into the center of my palette. I have the Mother Colors (NG, QR, PB), French Ultramarine and the new addition of Hansa Yellow Light. Starting on the left side directly below the poinsettia and working counter clockwise. I use a mixture of French Ultramarine &

Quinacridone Rose. I carve out shapes with hard edges against the petals. As I move across the lower section I want my colors to move from purples into the greens. With each brush load I slightly shift the green. Below the center poinsettia is a cooler green and pushes towards the blues. As I move across the lower section (left to right) I carve out more petal shapes. Above the far right poinsettia the greens are much warmer and have more Hansa Yellow Light. The small negative shapes in the center of each flower is a dark mixture of French Ultramarine & Quinacridone Rose. Let throughly dry.


FINAL STAGE: DARKEST DARKS, SMALLEST SHAPES & DETAILS
As the poinsettia turns from the light I have a variety of shadows. Form shadows have soft edges and cast shadows have hard edges. The shadows on the petals are a darker value of Quinacridone Rose with a touch of French Ultramarine as it turns from the light. When I need to soften the edge of a form shadow I use clean water on the edge before the paint has a chance to dry. The leaves beneath the center poinsettia is the darkest passage of negative painting. I use a mixture of Phthalo Blue GS & New Gamboge, before the paint has a chance to loose its shine I drop a little Quinacridone Rose into the passage. The unexpected warmth brings life to the dark greens. A few touches of color in the center of the poinsettia and it’s finished.


Hope you’ve enjoyed this short demonstration. I used the Daniel Smith Essentials Set. The set consists of six tubes of paints. A warm and cool: red, blue and yellow. The colors are VERY transparent (exception of Hansa Yellow Light which is semi-transparent).

Happy Painting!
Brenda

Saturday, March 17, 2012

Negative Painting with Watercolor



 Negative painting is one of the most exciting approaches to watercolor I know! The technique is a unique approach of painting around an object to define it in a composition. When working in watercolor we have the challenge that other mediums do not. It is what we don’t paint that becomes the most important element. Think of yourself as a stone carver, chipping away, until only the most precious lights remains.  There are many techniques to saving the “lights” of the paper. I have experimented with masking fluids, tapes to save the “lights” but found the end result was either harsh or cutout looking. I preserve the “lights” of the paper from the very beginning by painting around them.
Opaque and Transparent


Opaque Paints (top row): Cadmium Yellow, Cadmium Red Light, and Horizon Blue.

Transparent paints (bottom row): Quinophthalone Yellow, Scarlet Lake, and Cerulean Blue.


It is best to avoid opaque paints (such as cadmiums) for negative painting. Opaque are fine for accent marks at the end but not for glazing. The technique requires numerous glazes which will become muddy with opaque paints. To determine if your paints are opaque or transparent do a simple test. With a permanent marker draw a bold line across a piece of watercolor paper. With paint the consistency of cream paints over the line. If the line is obscured at all it is opaque.

Learn more about paint characteristics by reading my post on the topic.
3 Colors for under-painting

 Underpainting: To determine which 3 colors I will use for the under-painting I make numerous color swatches. The swatches will contain a red, blue, and yellow. The colors do not need to be true primaries. When I mix the colors it is important to have the paint be the same consistence to encourage good mixing on the paper. I am looking for colors that have the underlying feeling of the subject matter. The 3 colors I selected are Carmine (C), Cobalt Teal Blue (CTB), and Raw Sienna (RS).

Step #1, Line Drawing: When I draw for a negative painting I am especially mindful of the space and shapes between the leaves and pomegranate (negative space). I want to have shape and size variety. I draw enough to get the general shapes. It is important not to over draw. Allow opportunities for additional shapes to be developed in the painting process.


Step #2: I wet the entire paper with clean water and introduce the 3 paint colors separately (Raw Sienna, Cobalt Teal Blue, and Carmine). I paint at an angle to encourage mixing as the paint runs down the paper. I don’t over work the surface with a paint brush but encourage the paint to mix on the paper. While the paper was still damp I lifted a little color off one pomegranate with a damp brush. Let thoroughly dry.


Step #3: Start glazing. I will add additional paint colors but I will use the 3 original colors through out the painting process. I consider these my “mother colors”. I paint hard edges against the pomegranate and some of the leaves, and soften edges with water as I move out from the subject. This is what I call the “adolescence of a painting”, because it looks and feels awkward. Let thoroughly dry.


Step #4: With each glaze I create new negative shapes and darker values. I sometimes soften edges with a light spray of water while the paint is wet. This technique is most evident on the bottom pomegranate where I used a brush saturated with Carmine to paint the lower section and quickly used a spray bottle to help move the paint down the paper. Let thoroughly dry.


Step #5: In the final stage I paint the darkest darks and smallest shapes. I use a rich deep green made with Marine Blue and Burnt sienna. While paint is still wet I drop a small amount of Scarlet Lake to the green mixture to liven it up. I am selective to place my darkest darks near my lights to intensify the focal area. I finish with cast shadows and a few details. 

Happy Painting!
Brenda


Step #5 Final step



Wednesday, March 14, 2012

Watercolor Paints: Understanding Opaque and Transparent

I am going to put on my teacher’s hat and talk about watercolor paints and their particular characteristics. The reason I am spending time on this topic is that I want to share information about "negative" painting, and it is necessary to understand opaque and transparent for this technique to work.

Transparent: permits light to penetrate. Allowing the white surface of the paper or underpainting to show through. These pigments are fine in texture. When multiple glazes of transparent colors are painted on top of each other (when dry) the color beneath will show through changing its appearance.


Opaque: impenetrable to light; not allowing light to pass through. These paints are relatively chalky in appearance when dry. All cadmiums are opaque.
 

Semi-Opaque or Semi-Transparent: These paints are “middle of the road”. These paints are generally safe for under-painting but not glazing techniques.

Opaque or Transparent how do you know?This information is available from manufactures and can be accessed in catalogs, art supply stores and the internet. I have spent a sizable amount of time collecting manufacture information. Not everyone has time or interest to do this research. The quickest and best way to determine if your paints are opaque or transparent is to do a simple test. With a permanent marker (Sharpie Chisel tip) draw a bold line across a piece of 2x2 inch watercolor paper. With paint the consistency of whole milk paint over the line. If the black line is obscured (chalky looking) it is opaque. On the paint swatch I write information (brand, color name, index code). I keep all my color swatches in a binder for future reference. Over the years I have built an extensive binder of color swatches. I am amazed how often I refer to this information. 


I don’t want to give the impression I am against using opaque paints… I like them but I don’t keep them on my palette as a main color. When I need an opaque color I squirt out some fresh paint. I do a lot of “negative” painting built up with glazes, and glazes get “muddy” with opaque paint. Opaque are great for accent marks at the end, but not for glazing. Glazing is when you paint a transparent layer on top of a dry layer. Opaque paints will look chalky or muddy if used for glazing. If you have a tendency to get “muddy” colors chances are you have an opaque paint on your palette.Look closely at the paint swatches below. 
Look at the top row and notice how the paint seems to be sitting on top of the line...this means opaque.
Look at the bottom row, notice how the paint does not effect the black line...this means transparent. 

 I encourage you to try this exercise with your current palette of paint. You might be surprise!

Happy Painting!
Brenda